Early Bin-Fill Alerts at a Railway Station in Taiwan
At a railway station in Taiwan, B01 monitoring triggers an alert at the configured 85% fill threshold and sends a LINE message to the cleaner responsible for that area.
Project Profile
- Region: Taiwan
- Category: City
- Products: B01
Deployment Reference
- 85% — Configured early-alert threshold (A site setting, not an outcome or accuracy rate)
- LINE — Message goes directly to the cleaner responsible for the area
- 2-Step — B01 alert → LINE notification
Case Snapshot
A railway station in Taiwan has formally adopted B01 fill-level monitoring. At monitored bins, B01 is mounted inside the enclosure below the opening. When fill reaches the configured 85% threshold, the workflow sends a LINE message containing the bin location to the cleaner responsible for that area, allowing the person to respond without waiting for a control-desk relay.
Problem
Fixed rounds did not reflect how differently station bins filled
Bins are distributed across platforms, concourses, and level-transition points, while waste volume changes with train arrivals, transfer traffic, and holidays. A fixed inspection route may repeatedly check low-demand bins while another location is approaching capacity.
Waiting until staff or passengers can see an overflow also means the opportunity for early action has passed. The station needed a location-specific signal before waste reached the bin opening.
Solution
In-bin sensing starts a direct message at the configured 85% threshold
B01 Smart Laser Waste Bin Sensors are mounted inside monitored bins below the opening and measure fill height without contact. This position allows an early trigger before waste reaches the opening. For this deployment, the trigger is configured at 85%. It is a site setting, not a sensor-accuracy figure or measured improvement.
When the threshold is reached, the workflow sends a LINE message containing the bin location to the cleaner responsible for that area. Staff use the communication tool already adopted on site, so the notification fits the current practice without introducing a separate mobile application.
Value
Cleaning decisions can follow observed fill status
The cleaning team receives a location-specific signal while the bin is approaching capacity, providing an operational basis for prioritizing that location before an overflow is visible.
Direct notification also removes a relay step between the detected condition and the person carrying out the work. The deployment therefore supports condition-based cleaning decisions without claiming an unverified reduction in labor hours, response time, or overflow frequency.
Next Step
For a similar railway station, review bin geometry, threshold settings, LINE-recipient ownership, escalation rules, and device-maintenance responsibility before extending the workflow to additional areas.
Explore Solutions / Talk to an Expert
Image Gallery
